Diesel Exhaust Fluid – Understanding IBC’s closed loop system II

Ok so we are going to wrap up the diesel exhaust fluid closed loop systems with this entry by highlighting this question:  What do I need to refill a DEF tote on location?

Our recommendation will always be to stick with Micromatic’s closed loop systems for DEF.

So, now you understand the basics for a one way tote (from our previous entry) with a closed loop system, let’s talk about how to refill that same tote over and over again; which would be a great savings over time, don’t you agree?

Now, a DEF closed loop systems is important for the following reasons:

DEF PURITY IS REQUIRED

If Not Handled Properly…

  • Detrimentally Affects SCR Performance
  • Will Void Vehicle Warranties
  • Causes Premature Catalyst Deactivation
  • Fouling of Pre-filters & Injector Nozzles

def-closed1 The next illustration shows the RSV (Reusable Stainless Valve) System. This is a great system for onsite refilling, so let’s see how it works.

9551-Reusable-Stainless-Valve-2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. SS Fill Head Coupler- Closed, Sealed & Secure– Spring actuated and self-closing upon disconnect keeps product contained within the dispense hose, eliminating any chance of spills. Dry Disconnect – Less than 2 milliliters.  Reusable, Durable Stainless Steel Construction. Part#744-026

This is the part that you need on your refilling system, the tank or totes that you are carrying around to refill your customers.  You will need to remove the existing coupler on the customer’s tote and take this fill head coupler and secure it on the IBC. Your hose will run from your delivery truck to the IBC to start refilling.  And remember, your delivery hose (re-fill) will have the fill head coupler; part#744-026

2. SS dispense coupler-Closed, Sealed & Secure
Spring actuated and self-closing upon disconnect keeps
product contained within the dispense hose, eliminating any chance of spills. Part#744-048

Once you know you will be servicing a customer on site, this is the coupler that you will need to have on the IBC tote.

3 & 4. We can skid these two for now.

5. Container valve– Closed, Sealed & Secure
Self-closing upon disconnect, prevents unauthorized
access to the product in the container. Part#743-097

6. Skip for now

7.Downtube– Part#743-236/1245 (for a 330 gal tote)

That is what you need to do onsite refilling; and if you have any other questions; come by our warehouse we will be happy to demonstrate with one of our totes.

We have these Micromatic parts in stock here in Houston.  Call us for more details at 281-377-5845 or email us for equipment information.

 

Thank you for reading our Blog.

Transliquid Technologies – not only thinking different, but doing business different.  Call us today at 281-377-5845

Diesel Exhaust Fluid- Understanding IBC’s with closed loop systems I

Hi folks-  we have been on the streets of Houston quiet a bit this past couple of weeks, talking Diesel Exhaust Fluid, right here in our back yard.

What we have found is the continuous confusion about dispensing from closed loop systems. Now, our job here is to help you and our distributor network understand these options; so we felt it was important to reharsh this concept once again.

Our previous post dealt with what you have available as far as distribution channels. One way IBC totes, returnable/refillable, on site refilling, at a glance.

Why don’t we dig in a little deeper on the handling and dispensing of Diesel Exhaust Fluid with a closed loop systems.

What is a DEF closed loop system? Micromatic is the system that we use, it is now company policy that only closed loop systems are being sold with either drums or IBC totes. The pictures below will illustrate the diesel exhaust fluid closed loop system.

Ok, now what we have a better picture of what that system is.  The following question came up: What do I need to make this system work for me on one way totes and refilling totes on site?

So, let’s take the first half of the question on one way DEF IBC Totes.

Say you are ready to serve one of your customer with an order of 330 gallons of Diesel Exhaust Fluid in an IBC Tote package.  How are you going to create a closed loop system when that tote will eventually be swapped out for a new one?

Starting from the top and working down into the IBC tote, here is what you need: 1) SS coupler, 2) container valve (economical) 3)down tube (275 gal or 330 gal).

From the SS coupler, you will need to clamp your EPDM hose for your pump.  We have these Micromatic parts in stock here in Houston, as well as the diesel exhaust fluid pump dispensers. Call us for more details at 281-377-5845 or email us for equipment information.

micromtic_756-008B

 

 

 

1 – Part #756-008B

755-003diesel exhaust fluid houston texas

2- Part# 755-003

macromatic closed loop systems for DEF

 

 

755-641_1245

 

 

3- Part#755-641/1245 g

 

When the DEF fluid is all used up, you can reuse the coupler on the new IBC coming in already filled with DEF.

micromatic closed loop system120

The second part of the question deals with servicing your customers by providing on location re-filling.  In other words, reuse the same tote by refilling on site.  We will discuss this in detail on the next blog entry.

Join our other email blog subscribers, simply sign up at the very top of the blog page and receive an email delivered right into your inbox.

Enjoy your weekend!

Thank you for reading our Blog.

Transliquid Technologies – not only thinking different, but doing business different.  Call us today at 281-377-5845